To
delete all configurations on a Cisco switch in Packet Tracer, follow
these steps:
1. Erase the Startup Configuration
Enter
privileged EXEC mode:
enable
Erase
the startup configuration:
erase startup-config
Confirm
by pressing Enter when prompted.
2. Delete the VLAN Database (if
applicable)
Erase
the VLAN configuration:
delete flash:vlan.dat
Confirm
deletion by pressing Enter when prompted.
3. Reload the Switch
Restart
the switch to apply changes:
reload
If
prompted to save the configuration, type no and press Enter.
After
the switch reloads, it will return to factory default settings. You can verify
by checking the configuration:
show running-config
It
should now be in its default state.
Let
me know if you need further clarification! 🚀
You can follow this blog post below to learn a graphical representation of How to Delete Router Configuration in Packet Tracer.
Deleting configurations are the same for
both Router and Switch. You will learn in-depth details from this post.
The first time I configured a router and then showed how to delete router
configuration in Cisco Packet Tracer. So I highly recommend this to read this
blog post.
0Comments